STEEL tanks
-
Built from Chromium Molybdenum steel plate
-
Utilizes the deep drawn process; the preferred method to build a steel scuba cylinder
-
This process yields a cylinder with a very uniform wall thickness resulting in a lighter, more efficient cylinder
Buoyancy
-
Superior buoyancy characteristics
-
These cylinders have been designed to be slightly negative at the end of a dive
Exterior Finish
-
The exterior of all our Scuba steel cylinders are hot-dip galvanized. This highly-demanded and preferred finish is utilized on all steel cylinders. Don't be misled by claims from companies distributing steel cylinders with painted exteriors. There is no better process to protect a steel cylinder from rust and corrosion than hot-dip galvinization!
Nitrox Ready
-
Cleaned and sealed at the factory
-
Free of hydrocarbons to a level of 40 mg per square meter
-
Ready for pre-blended Nitrox up to 40% FO2
Boots
-
Included with all steel cylinders, except pony bottles
-
Quality, self-draining design
Valves
-
All of our Scuba steel cylinders include the international convertible valve
-
Convertible design allows for standard yoke or 230 bar DIN connections
-
Standard inlet thread (3/4"-14 NPSM) on cylinder allows upgrade to any other Thermo valve
-
These valves are clean for pre-blended Nitrox up to 40% FO2
-
Valve Caps protect your regulator from dirt that may enter your valve aperture.
Tank Banger really gets your dive buddies attention when you snap it against your tank.
Tank Nets to color code your tank and make it easy to identify at sight.
Tank sticker, large one for standard tanks, small one for pony bottles.
Tank Carrier fits 6.9" to 8" tanks, locking tank band straps, stainless D rings, rubber carry handle, padded removeable shoulder strap.
Not for SCUBA tank sticker used by paintballers and others who do not need breathing air in the tank
!
